Polycom HDX Series Administrator's Manual page 45

Setting Description
PIP Specifies PIP (Picture-in-Picture) behavior:
• Camera — The PIP window is displayed when the call is first
connected and when a user moves the camera, uses presets,
or switches to a different camera source.
• On — The PIP window stays on for the duration of the call.
• Off — The PIP window is not displayed during the call.
Note: PIP settings are also available in the User Settings screen.
Users can turn the PIP on or off and change its location on the
screen using
Display Near Specify whether to display near video on this monitor.
Video
Display Far Specify whether to display far video on this monitor.
Video
Display Specify whether to display content on this monitor.
Content
Dual Monitor Specifies whether the system can show multiple views on a single
Emulation display. If content is being viewed, different views can be
displayed by pressing
For more information, refer to
page 3-7.
3. Select and configure these settings:
Setting Description
Monitor 2 Specifies the second monitor's aspect ratio:
• Off — Select if you do not have a second monitor.
• 4:3 — Select if you are using a regular TV monitor as the
second monitor.
• 16:9—Select if you are using a wide-screen monitor as the
second monitor. On the monitor, select the display mode that
uniformly stretches the video from side to side, which is
usually called Full, Wide screen, or 16x9.
Display on the remote control.
Display on the remote control.
Using Dual Monitor Emulation
Monitors and Cameras
on
3 - 3