Bard MULTI-TEC W18ABP Series Literature Assembly page 87

Installing Optional Outdoor Temperature/Humidity Sensor
One optional outdoor temperature/humidity sensor (8301-090) can be installed. Follow the manufacturer's mounting
instructions. Use 18 gauge 5-conductor shielded cable to connect to controller. The maximum cable length to connect
the temperature/humidity sensor to the LC6000 is 98'.
1. Connect wires from the 18 gauge shielded cable to terminals #65, #66, #67, #70 and #71.
Wire
TB# Sensor
Mark
70 B12
71 ND
67 B11
66 GND
65 +VDC
46 47 48 49 50 51 52
2. Connect the other end of the shielded cable to the sensor terminals. Be sure wires are connected to proper terminals
as shown in table above.
Manual 2100-713A
Page 24 of 44
Remote Outdoor Temperature/Humidity Sensor Installation
4 Remote Outdoor Temperature Sensor
5 Ground
1 Remote Outdoor Humidity Sensor: 0-10 VDC
3 Ground
2 +VDC
53 54 55 56 57 58 59
FIGURE 16
Description
60 62
61 64
63
68 67 72
66 65 70 69
71