Bard MULTI-TEC W18ABP Series Literature Assembly page 101

To enable/disable Zone 2 Indoor Humidity:
1) Press MENU key to go to the Main Menu
screen.
2) Press UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z2 Indoor
Hum C5.
5) Press ENTER key to scroll to Enable (see
Figure 35).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
FIGURE 35
Enable/Disable Zone 2 Indoor Humidity Sensor
To enable/disable Zone 3 Indoor Humidity:
1) Press MENU key to go to the Main Menu
screen.
2) Press UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z3 Indoor
Hum C6.
5) Press ENTER key to scroll to Enable (see
Figure 36).
FIGURE 36
Enable/Disable Zone 3 Indoor Humidity Sensor
Manual 2100-713A
Page 38 of 44
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
To enable/disable Zone 1 Indoor Temperature:
1) Press MENU key to go to the Main Menu
screen.
2) Use UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z1 Indoor
Temp C7.
5) Press ENTER key to scroll to Enable (see
Figure 37).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
FIGURE 37
Enable/Disable Zone 1 Indoor Temperature Sensor
To enable/disable Zone 1 Remote Temperature:
1) Press MENU key to go to the Main Menu
screen.
2) Use UP or DOWN keys and ENTER key to enter
USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z1 Remote
Temp C8.
5) Press ENTER key to scroll to Enable (see
Figure 38).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).