Table of Contents
Advertisement
16
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
291
•
Authentication Port—Enter the UDP port number of the RADIUS server port for
authentication requests.
•
Accounting Port—Enter the UDP port number of the RADIUS server port for
accounting requests.
Trap Settings
•
RADIUS Accounting Traps—Check to generate traps for RADIUS accounting events.
•
RADIUS Authentication Failure Traps—Check to generate traps for logins that
failed.
•
RADIUS Authentication Success Traps—Check to generate traps for logins that
succeeded.
Click Apply. The RADIUS default settings for the device are updated in the Running
Configuration file.
RADIUS Server Keys
To set the RADIUS server keys:
Click Security > RADIUS Server > RADIUS Server Keys.
Enter the default RADIUS keys if required. Values entered in the Default Key are applied to
all servers configured (in the Add RADIUS Server page) to use the default key.
•
Default Key—Enter the default key string used for authenticating and encrypting
between the device and the RADIUS client. Select one of the following options:
-
Keep existing default key—For specified servers, the device attempts to
authenticate the RADIUS client by using the existing, default Key String.
-
Encrypted—To encrypt communications by using MD5, enter the key in encrypted
form.
-
Plaintext—Enter the key string in plaintext mode.
•
MD5 Digest—Displays the MD5 digest of the user-entered password.
Click Apply. The RADIUS default settings for the device are updated in the Running
Configuration file.
To add a secret key, click Add and enter the following fields:
•
NAS Address—Address of switch containing RADIUS client. Displays N/A if the
Event Type is Date/Time Change or Reset.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Security
RADIUS
Hide quick links:
Advertisement
Table of Contents
