Table of Contents
Advertisement
Administration: Discovery
Discover - LLDP
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
•
PD Requested Power Value—Amount of power allocated by the PSE to the PD.
•
PSE Allocated Power Value—Amount of power allocated to the sourcing equipment
(PSE).
802.3 Energy Efficient Ethernet (EEE) (If device supports EEE)
•
Local Tx—Indicates the time (in micro seconds) that the transmitting link partner waits
before it starts transmitting data after leaving Low Power Idle (LPI mode).
•
Local Rx—Indicates the time (in micro seconds) that the receiving link partner requests
that the transmitting link partner waits before transmission of data following Low
Power Idle (LPI mode).
•
Remote Tx Echo—Indicates the local link partner's reflection of the remote link
partner's Tx value.
•
Remote Rx Echo—Indicates the local link partner's reflection of the remote link
partner's Rx value.
4-Wire Power via MDI
•
4-Pair PoE Supported—Indicates system and port support enabling the 4-pair wire
(true only for specific ports that have this HW ability).
•
Spare Pair Detection/Classification Required—Indicates that the 4-pair wire is
needed.
•
PD Spare Pair Desired State—Indicates a pod device requesting to enable the 4-pair
ability.
•
PD Spare Pair Operational State—Indicates whether the 4-pair ability is enabled or
disabled.
MED Details
•
Capabilities Supported—MED capabilities supported on the port.
•
Current Capabilities—MED capabilities enabled on the port.
•
Device Class—LLDP-MED endpoint device class. The possible device classes are:
-
Endpoint Class 1—Generic endpoint class, offering basic LLDP services.
-
Endpoint Class 2—Media endpoint class, offering media streaming capabilities, as
well as all Class 1 features.
8
120
Hide quick links:
Advertisement
Table of Contents
