Table of Contents
Advertisement
8
119
•
Interface Subtype—Numbering method used for defining the interface number.
•
Interface Number—Specific interface associated with this management address.
MAC/PHY Details
•
Auto-Negotiation Supported—Port speed auto-negotiation support status.
•
Auto-Negotiation Enabled—Port speed auto-negotiation active status.
•
Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation capabilities;
for example, 1000BASE-T half duplex mode, 100BASE-TX full duplex mode.
•
Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU performs
physical layer functions, including digital data conversion from the Ethernet interfaces'
collision detection and bit injection into the network; for example, 100BASE-TX full
duplex mode.
802.3 Details
•
802.3 Maximum Frame Size—The maximum supported IEEE 802.3 frame size.
802.3 Link Aggregation
•
Aggregation Capability—Indicates whether the interface can be aggregated.
•
Aggregation Status—Indicates whether the interface is aggregated.
•
Aggregation Port ID—Advertised aggregated interface ID.
802.3 Power via MDI
•
MDI Power Support Port Class—Advertised power support port class.
•
PSE MDI Power Support—Indicates if MDI power is supported on the port.
•
PSE MDI Power State—Indicates if MDI power is enabled on the port.
•
PSE Power Pair Control Ability—Indicates if power pair control is supported on the
port.
•
PSE Power Pair—Power pair control type supported on the port.
•
PSE Power Class—Advertised power class of the port.
•
Power Type—Type of pod device connected to the port.
•
Power Source—Port power source.
•
Power Priority—Port power priority.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
Administration: Discovery
Discover - LLDP
Hide quick links:
Advertisement
Table of Contents
