Search - Cisco SX350 Series Administration Manual

Smart Network Application (SNA)

Search

STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
Search
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
To create a new tag perform the following steps:
In the Tags section, click in the Add tag name text box and enter a tag name.
Click ADD+. The tag name is then displayed. The below shows that the tag first_floor has
been created.
You may add tags that have the same names as built-in tags. These tags appear similar to user-
defined tags and you can remove them at any time. Since these tags are distinct from the built-
in tags, it is possible for tags with the same name to appear twice on a single element as long
as one of them is user-defined and the other is built-in.
To add a tag to a device perform the following steps:
Select the device.
In the Tag section, click the Add tag name text box. A list of tags is displayed.
Select the tag to be applied to the device.
Use the search functionality to locate specific devices in the Topology view.
The search term entered is searched in the information known to SNA.
The following items can be searched:
•
IP addresses
29
680