Status and Statistics
Viewing 802. 1 X EAP Statistics
Viewing 802.1X EAP Statistics
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide Release 1.3
To clear statistics counters:
•
Click Clear Interface Counters to clear the selected counters.
•
Click View All Interfaces Statistics to see all ports on a single page.
The 802. 1 x EAP page displays detailed information regarding the EAP (Extensible
Authentication Protocol) frames that were sent or received. To configure the
802. 1 X feature, see the 802. 1 X Properties page.
To view the EAP Statistics and/or set the refresh rate:
Click Status and Statistics > 802.1x EAP.
Select the Interface that is polled for statistics.
Select the time period (Refresh Rate) that passes before the EAP statistics are
refreshed.
The values are displayed for the selected interface.
•
EAPOL Frames Received—Valid EAPOL frames received on the port.
•
EAPOL Frames Transmitted—Valid EAPOL frames transmitted by the port.
•
EAPOL Start Frames Received—EAPOL Start frames received on the port.
•
EAPOL Logoff Frames Received—EAPOL Logoff frames received on the
port.
•
EAP Response/ID Frames Received—EAP Resp/ID frames received on the
port.
•
EAP Response Frames Received—EAP Response frames received by the
port (other than Resp/ID frames).
•
EAP Request/ID Frames Transmitted—EAP Req/ID frames transmitted by
the port.
•
EAP Request Frames Transmitted—EAP Request frames transmitted by
the port.
2
16