Cisco 550X Series Quick Start Manual
Stackable managed switches
Hide thumbs
Also See for 550X Series:
- Administration manual (762 pages) ,
- Quick start manual (21 pages)
Related Manuals for Cisco 550X Series
Summary of Contents for Cisco 550X Series
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Cisco SG550X-24 o cerca il tuo prodotto tra le migliori offerte di Switch Quick Start Guide Cisco 550X Series Stackable Managed Switches...
-
Page 2: Before You Begin
Welcome Thank you for choosing the Cisco 550X Series Stackable Managed Switch, a Cisco network communications device. This device is designed to be operational right out-of-the-box as a standard layer 2 and 3 switch. In the default configuration, it will forward packets between connecting devices after power up. -
Page 3: Placement Tips
For stability, load the rack from the bottom to the top, with the AUTION heaviest devices on the bottom. A top-heavy rack is likely to be unstable and might tip over. Cisco 550X Series Stackable Managed Switches Quick Start Guide... -
Page 4: Connecting Network Devices
Cisco 550X Series Stackable Managed Switches Features for details about the different ports and LEDs on each switch. Repeat Step 1 Step 2 for each device that you want to connect to the switch. Cisco 550X Series Stackable Managed Switches Quick Start Guide... -
Page 5: Power Over Ethernet Considerations
802.3af/at SF550X-48MP *60-Watt PoE: port 60-Watt PoE 1,2,3,4,5,6,7,8,25,26, 27,28,29,30,31,32 195 Watts 1–24 802.3af/at SG550X-24P *60-Watt PoE: port 60-Watt PoE 1,2,3,4,13,14,15,16 382 Watts 1–24 802.3af/at SG550X-24MP *60-Watt PoE: port 60-Watt PoE 1,2,3,4,13,14,15,16 Cisco 550X Series Stackable Managed Switches Quick Start Guide... - Page 6 740 Watts 1–48 802.3af/at SG550X-48MP *60-Watt PoE: port 60-Watt PoE 1,2,3,4,5,6,7,8,25,26, 27,28,29,30,31,32 *60-Watt PoE extends the IEEE Power over Ethernet Plus standard to double the power per port to 60 watts. Cisco 550X Series Stackable Managed Switches Quick Start Guide...
- Page 7 The switch can be accessed and managed by two different methods; over your IP network using the web-based interface, or by using the switch’s command-line interface through the console port. Using the console port requires advanced user skills. Cisco 550X Series Stackable Managed Switches Quick Start Guide...
-
Page 8: Configuring Your Switch Using The Web-Based Interface
To configure the switch using the web-based interface: Power on the computer and your switch. For Cisco 550XG switches, connect the computer to the OOB port found on the front panel. For Cisco 550X switches, connect the computer to any network port. -
Page 9: Configuring Your Switch Using The Console Port
Save icon. Exiting before you save your configuration will result in all changes being lost. The Getting Started page opens. You are now ready to configure the switch. Refer to the Cisco 550X Series Stackable Managed Switches Administration Guide or see the help pages for further information. - Page 10 Make sure that any configuration changes made are saved AUTION before exiting. You are now ready to configure the switch. Refer to the Cisco 550X Series Stackable Managed Switches Command Line Interface Reference Guide for further information. If you are not using DHCP on your network, set the IP address type on the switch to Static and change the static IP address and subnet mask to match your network topology.
- Page 11 Stacking the Cisco 550X Series Stackable Managed Switches Before configuring the switches as a stack, refer to the Cisco 550X Series Stackable Managed Switches Administration Guide for additional details. Refer to the front panel graphics in Cisco 550X Series Stackable...
-
Page 12: Product Models
SF550X-48P 48-Port 10/100 PoE Stackable Managed Switch SF550X-48MP 48-Port 10/100 PoE Stackable Managed Switch Front Panel The ports, LEDs, and Reset button are located on the front panel of the switch. Cisco 550X Series Stackable Managed Switches Quick Start Guide... - Page 13 • The SFP+ ports are compatible with Cisco modules MGBSX1, MGBLH1, MGBT1, MGBLX1, MGBBX1, as well as other brands of modules. • The Cisco SFP+ 10G optical modules that are supported in the Cisco 550X Series Stackable Managed Switches are: SFP-10G-SR and SFP- 10G-LR.
- Page 14 Cisco Redundant Power System 2300 (RPS2300), blinking when the power backing up is in process. If the LED flashes Amber, the Cisco RPS2300 is used for other switch. Fan—(Green) Lights steady when the cooling fan is operational. Flashes Amber when both two fans have failures.
-
Page 15: Reset Button
The power port and console port are located on the back panel of the switch. Power—Connects the switch to AC power. RPS Port—Connects the switch to the Cisco RPS2300 module. The Cisco RPS2300 can provide backup power to the switch when the main power supply has a failure. - Page 16 System LED provides an indication of where the switch received the IP address (See Front Panel for details.) Make sure that no other device is using the same IP address as the switch. Cisco 550X Series Stackable Managed Switches Quick Start Guide...
- Page 17 Unusually long access time: Due to the standard spanning tree loop detection logic, adding new connections may take 30 to 60 seconds for the affected interfaces and/or LAN to become operational. Cisco 550X Series Stackable Managed Switches Quick Start Guide...
-
Page 18: Where To Go From Here
Warranty Information www.cisco-warrantyfinder.com This is a class A product. In a domestic environment this ARNING product may cause radio interference in which case the user may be required to take adequate measures. Cisco 550X Series Stackable Managed Switches Quick Start Guide... - Page 19 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.
- Page 20 Cisco 550X Series Stackable Managed Switches Quick Start Guide...