Table of Contents
Advertisement
Security
Management Access Method
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
•
Rule Priority—Enter the rule priority. When the packet is matched to a rule, user
groups are either granted or denied access to the device. The rule priority is essential to
matching packets to rules, as packets are matched on a first-fit basis.
•
Management Method—Select the management method for which the rule is defined.
The options are:
-
All—Assigns all management methods to the rule.
-
Telnet—Users requesting access to the device that meets the Telnet access profile
criteria are permitted or denied access.
-
Secure Telnet (SSH)—Users requesting access to the device that meets the Telnet
access profile criteria, are permitted or denied access.
-
HTTP—Assigns HTTP access to the rule. Users requesting access to the device that
meets the HTTP access profile criteria, are permitted or denied.
-
Secure HTTP (HTTPS)—Users requesting access to the device that meets the
HTTPS access profile criteria, are permitted or denied.
-
SNMP—Users requesting access to the device that meets the SNMP access profile
criteria are permitted or denied.
•
Action—Select one of the following options.
-
Permit—Allow device access to users coming from the interface and IP source
defined in this rule.
-
Deny—Deny device access to users coming from the interface and IP source defined
in this rule.
•
Applies to Interface—Select the interface attached to the rule. The options are:
-
All—Applies to all ports, VLANs, and LAGs.
-
User Defined—Applies only to the port, VLAN, or LAG selected.
•
Interface—Enter the interface number. The OOB port can also be entered.
•
Applies to Source IP Address—Select the type of source IP address to which the
access profile applies. The Source IP Address field is valid for a subnetwork. Select one
of the following values:
-
All—Applies to all types of IP addresses.
-
User Defined—Applies to only those types of IP addresses defined in the fields.
•
IP Version—Select the supported IP version of the source address: IPv6 or IPv4.
16
306
Hide quick links:
Advertisement
Table of Contents
