Cisco SX350 Series Administration Manual page 42

3
STEP 8
STEP 9
STEP 10
35
• Time Range Name—If Time Range is selected, select the time range to be used. Time
ranges are defined in the
displayed if a Time Range was previously created.
Click Next.
Confirm that you want the ACL and ACE to be created.
The details of the ACL rule are displayed. You can click Add another rule to this ACL to
add another rule.
Click Next and enter the ACL Binding information:
• Binding Type—Select one of the following options to bind the ACL:
- Physical interfaces only—Bind the ACL to a port. In this case, click a port or ports
on which to bind the ACL.
- VLANs only—Bind the ACL to a VLAN. Enter the list of VLANs in the Enter the
list of VLANs you want to bind the ACL to field.
- No binding—Do not bind the ACL.
Click Apply.
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x
System Time Configuration
Configuration Wizards
ACL Wizard
section. This field is only