In Case Of The Following Displays - Panasonic SD-PM107 Operating Instructions Manual

Troubleshooting
When the following
conditions happen
Abnormal sounds
on the blade
Plug into the
outlet, the current
time on display is
"0:00"
Powders still
remain and baking
does not occur
Dough is leaking
out at the bottom
of the bread pan
The bottom of the
bread pan turns
black
• Smokes or odors may occur upon initial use. However, they will disappear some time after use. Operations are not
affected.

In case of the following displays

電源中斷
Display
Display
~
Display
EN46
SD-PM107_P36-47.indd 46
Please confirm the following issues first.
If any anomaly is still identified, please contact Panasonic customer
service centre immediately.
Causes
• There is a clearance between the blade and the shaft.
(The front end moves by 3 cm or so.)
• The lithium battery is at the end of its working life.
Before replacement of battery, operations can be
•
continued with power plug inserted.
Set the current time whenever you use the timer
•
functions.
• Have you forgotten to install the blade?
• Is the blade shaft excessively fastened in the
bread pan so that it cannot move.
• A small amount of dough leaks out from
the discharge port of the bread pan during
operations.
( )
To avoid affecting the
rotations, the dough that
enters the rotational part
will be discharged.
This is normal.
Please confirm if the
blade is rotating.
• The bottom of the bread pan may turn black due to frictions when kneading.
In that case, please wipe and clean with a damp kitchen towel.
• Notifies you of power failure during operations.
If power fails for less than 10 minutes, the operations will resume when
power supply resumes.
(Unsuccessful bread-making may occur sometimes)
• It will still display when the power plug is plugged in after it is removed.
• The oven temperature rises high due
to continuous use. (above 40 °C)
• Failure
Please contact with Panasonic service centre for repair.
•
Please send to the service centre
for professional maintenance staff
to replace the battery.
Install the blade. (P. EN12)
Please replace the main shaft
bearing if the blade shaft does not
rotate.
(
Please consult your Panasonic
customer service centre.
Discharge port
(4 positions)
( )
At the bottom of
Shaft
the bread pan
Open the lid to reduce heat
inside of the main unit fully.
(Cool down for about 1 hour after
baking is finished)
Solutions
)
3/5/2018 20:12:16