Fuji Xerox DocuCentre S2011 Basic Operation Manual page 19

4
Press the <Start> button to confirm the settings.
To exit the paper size setting mode without saving, press the <Clear All> or the <Stop> button.
Be sure to press the <Start> button to confirm the settings. Otherwise the settings, the size and orientation of
paper, are canceled and the previous settings are remained.
The orientation of document and paper is important!
Unexpected resolves may occur when the orientation of document does not match the
orientation of loaded paper.
In the following cases, you can copy without considering the orientation of paper since
the machine automatically rotates the scanned data.
- The tray selection is set to automatic.
- The zoom ratio is set to automatic.
- The zoom ratio is set to "100 %" and both document and paper are the same size.
Make sure to set the size and orientation of document when using the document glass.
Document
Paper
< Document Feeder > < Document Glass >
Output
Preparations
19