Placing Document - Fuji Xerox DocuCentre S2011 Basic Operation Manual

Preparations

Placing Document

Place the document in the document feeder
Only the standard sizes
are supported.
Place the document face up
in the center of the document
feeder by adjusting the
document guides to each side
of the document.
You cannot use the following documents using the document feeder:
Point
Use the document glass.
Mixed size Lightweight
(2 sided)
* If you can flatten the curled document, you can use the document.
Place the document on the document glass
Place the document face
down slightly away from
the top left corner of the
document glass.
20
Portrait orientation
A5 or Cut-and-
smaller pasted
Portrait orientation
If you cannot place the
document such as the
document size is too large,
place the short edge of the
document to be fed first.
Carbon-backed
Folded,
wrinkled,
curled*
If you cannot place the
document such as the
document size is too large,
place the short edge of the
document to be fed first.