Fuji Xerox DocuCentre S2011 Basic Operation Manual page 53

Error Code
091-424
[Cause]
[Remedy] Replace the drum cartridge immediately. Contact your local Fuji Xerox
091-430
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
091-440 [Cause]
[Remedy] Prepare a new drum cartridge.
091-441 [Cause]
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox representative or sales
091-914 [Cause]
091-915
[Remedy] Switch off the machine power, make sure that the display is blank, and then
091-916
091-921 [Cause]
[Remedy] Replace the drum cartridge. Contact your local Fuji Xerox representative or sales
092-660
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
092-661
[Cause]
[Remedy] Exchange the Sensor unit, and switch off the machine power, make sure that the
092-668 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
092-910 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
093-312 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
093-400 [Cause]
[Remedy] Replace the toner cartridge.
093-406
[Cause]
[Remedy] Prepare a new toner cartridge.
093-912
[Cause]
[Remedy] Replace the toner cartridge.
Cause and Remedy
The drum cartridge life is over.
representative or sales representative.
The drum cartridge life is over.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
The drum cartridge need to be replaced soon.
The drum cartridge need to be replaced soon.
representative.
An error occurred with the drum cartridge.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
An error occurred with the drum cartridge.
representative.
A drum cartridge error occurred.
switch on the machine power.
Temperature SNR (in CRU) value is out of range.
display is blank, and then switch on the machine power.
ATC SNR (in drum cartridge) value is out of range.
switch on the machine power.
An error occurred.
switch on the machine power.
An error occurred with the toner cartridge.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
There is no more toner in the toner cartridge.
The toner cartridge needs to be replaced soon.
There is no more toner in the toner cartridge.
Problem Solving
53