Fuji Xerox DocuCentre S2011 Basic Operation Manual page 51

Error Code
062-360
[Cause]
062-371
[Remedy] Switch off the machine power, make sure that the display is blank, and then
062-380
062-386
062-389
062-393
062-396
071-105 [Cause]
[Remedy] Remove the jammed paper.
072-102 [Cause]
[Remedy] Remove the jammed paper.
072-105 [Cause]
[Remedy] Remove the jammed paper.
072-210
[Cause]
072-212
[Remedy] Switch off the machine power, make sure that the display is blank, and then
072-215
072-461
072-470
073-102 [Cause]
[Remedy] Remove the jammed paper.
073-104 [Cause]
[Remedy] Remove the jammed paper.
073-105 [Cause]
[Remedy] Remove the jammed paper.
073-210 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
074-101 [Cause]
074-103
[Remedy] Remove the jammed paper.
074-104
[Cause]
[Remedy] Remove the jammed paper.
074-105
[Cause]
[Remedy] Remove the jammed paper.
074-210
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
Cause and Remedy
An error occurred.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
An error occurred in the left cover [A] or Tray 1.
An error occurred in the one tray module cover [B] or Tray 2.
A paper jam occurred in the one tray module cover [B].
An error occurred in Tray 2 (One Tray Module).
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
A paper jam occurred in the two tray module cover [C] or Tray 3.
A paper jam occurred in the one tray module cover [B] or the two tray module
cover [C].
A paper jam occurred in the one tray module cover [B].
An error occurred in Tray 3 (Two Tray Module).
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
A paper jam occurred in the two tray module cover [C] or Tray 4.
A paper jam occurred in the one tray module cover [B] or the two tray module
cover [C].
A paper jam occurred in the one tray module cover [B].
An error occurred in Tray 4 (Two Tray Module).
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
Problem Solving
51