Fuji Xerox DocuCentre S2011 Basic Operation Manual page 10

Before Using This Machine
Machine Installation
10
Switch off and unplug the product when it is not used over weekends or long
holidays.
Once a month, switch off this product and check if
 the power cord is plugged firmly into an electrical outlet;
 the plug is not excessively heated, rusted or bent;
the plug and electrical outlet are free of dust; and

 the power cord is not cracked or worn down.
Once you notice any unusual condition, switch off and unplug this product first and
contact your local Fuji Xerox representative.
Do not locate this product where people might step on or trip over the power cord.
Friction or excessive pressure may generate heat and eventually cause electric
shock or a fire accident.
Never locate this product in the following places:
Near radiators or any other heat sources

 Near volatile flammable materials such as curtains
 In the hot, humid, dusty or poorly ventilated environment
 In the place receiving direct sunlight
 Near cookers or humidifiers
This product weighs 33 kg (with the document feeder and duplex output unit
installed). When moving it, always carry it by a team of three or more persons to
avoid mishandling or injury.
When lifting this product, the first two persons to hold the bottom of the folded
bypass tray on the left side of the product, and the third person to hold the
handhold provided on the right side of the product. Never lift it by gripping any
other areas. It will prevent you from dropping the product and getting back ache or
injuries.
Locate this product on a level and sturdy surface that can withstand its weight.
Otherwise, if tilted, the product may fall over and cause injuries.
Locate this product in a well-ventilated area. Do not obstruct ventilation openings
of the product.
Keep the minimum clearance as follows for ventilation and an access to the power
plug. Unplug the product if an abnormal condition is noted.