Fuji Xerox DocuCentre S2011 Basic Operation Manual page 50

Problem Solving
Error Code
024-718
[Cause]
[Remedy] Confirm the print data, and try printing again.
026-737
[Cause]
[Remedy] Consult your network administrator whether the network or the server has any
027-518 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-520 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-522 [Cause]
[Remedy] Press the control panel's <Stop> button, and cancel the job.
027-528 [Cause]
[Remedy] Press the control panel's <Stop> button, and delete any unneeded data to create
027-543
[Cause]
[Remedy] Check whether the server name of the SMB server is correct, or press the control
042-325
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
042-400
[Cause]
[Remedy] Contact our Customer Support Center.
042-614 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
045-310 [Cause]
[Remedy] Removed the jammed paper.
045-313 [Cause]
047-218
[Remedy] Switch off the machine power, make sure that the display is blank, and then
061-321
061-325
062-277
[Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
062-311 [Cause]
[Remedy] Switch off the machine power, make sure that the display is blank, and then
50
Cause and Remedy
Incompatible print parameters are used. The combination of the specified
features such as Document Size, Paper Size, Paper Tray, 2 sided printing, and
Output Tray is incompatible.
A network error occurred.
problem.
Failed to login the forwarding destination.
Invalid characters are used or the specified path is not found.
Unable to write in the forwarding destination.
Data could not be written to the shared folder because the computer's hard disk
is full.
room on the hard disk.
The SMB server (NetBIOS) name is invalid.
panel's <Stop> button to cancel the job.
An error occurred.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
The odor filter life is over.
An error occurred.
switch on the machine power.
An error occurred.
An error occurred.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
An error occurred in the document feeder.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.
An error occurred.
switch on the machine power. If the same message is displayed again, contact
our Customer Support Center.