Safety; Safe Operating Practices - Toro Pro Sneak 360 Operator's Manual

Safety

Improper use or maintenance by the operator or owner
can result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety alert symbol
means: Caution , Warning , or Danger —personal safety
instruction. Failure to comply with the instruction may
result in personal injury or death.

Safe Operating Practices

This product is capable of amputating hands and feet. Always
follow all safety instructions to avoid serious injury or death.
WARNING
Engine exhaust contains carbon monoxide, an
odorless, deadly poison that can kill you.
Do not run the engine indoors or in an enclosed
area.
Training
•
Read the Operator's Manual and other training material. If
the operator(s) or mechanic(s) cannot read English, it is
the owner's responsibility to explain this material to them.
•
Become familiar with the safe operation of the equipment,
operator controls, and safety signs.
•
All operators and mechanics should be trained. The
owner is responsible for training the users.
•
Never let children or untrained people operate or service
the equipment. Local regulations may restrict the age of
the operator.
•
The owner/user can prevent and is responsible for
accidents or injuries occurring to people, or damage to
property.
Preparation
•
Evaluate the terrain to determine what accessories and
attachments are needed to properly and safely perform
the job. Only use accessories and attachments approved
by the manufacturer.
•
Wear appropriate clothing including hard hat, safety
glasses, long pants, safety shoes, reflector vests,
respirators, and hearing protection. Long hair, loose
clothing or jewelry may get tangled in moving parts.
•
Inspect the area where the equipment is to be used and
remove all objects such as rocks, toys, and wire which can
be thrown by the machine.
•
Use extra care when handling fuels. They are flammable
and vapors are explosive.
– Use only an approved container
– Never remove the fuel cap or add fuel with the engine
running. Allow the engine to cool before refueling.
Do not smoke.
– Never refuel or drain the machine indoors.
– Know the hand signals used on your job. Follow the
•
Check that the operator's presence controls, safety
switches, and shields are attached and functioning
, which
properly. Do not operate unless they are functioning
properly.
Operation
•
Before digging, have the area marked for
underground utilities, and do not dig in marked
areas.
•
Never run an engine in an enclosed area.
•
Before starting each day, check the machine for oil or fluid
leaks. Replace all damaged, loose, worn or missing parts
and follow the lubrication and maintenance procedures
shown in this manual.
•
Only operate in good light, keeping away from holes and
hidden hazards.
•
Be sure all drives are in neutral and parking brake is
engaged before starting the engine. Only start the engine
from the operator's position.
•
Slow down and use extra care on hillsides. Ground
conditions may adversely affect the stability of the
machine. Use caution when working on newly disturbed
earth.
•
Allow adequate space when turning this unit.
•
Slow down and use caution when making turns and when
changing directions on slopes.
•
Never operate without the guards securely in place. Be
sure all interlocks are attached, adjusted properly, and
functioning property.
•
Do not change the engine governor setting or overspeed
the engine.
•
Stop on level ground, lower implements, disengage the
auxiliary hydraulics, engage parking brake, and shut off
the engine before leaving the operator's position for any
reason.
•
Keep hands and feet away from moving attachments.
•
Look behind and down before backing up to be sure of
a clear path.
•
Never carry passengers and keep pets and bystanders
away.
•
Slow down and use caution when making turns and
crossing roads and sidewalks.
•
Do not operate the machine under the influence of
alcohol or drugs.
•
Use care when loading or unloading the machine into a
trailer or truck.
•
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
•
Read all attachment manuals.
4
instructions of the flagmen, signals, etc.