Specifications; Attachments/Accessories; Operation; Adding Fuel - Toro Pro Sneak 360 Operator's Manual

Neutral Indicator Light
This light illuminates when all control levers are in the neutral
position.

Specifications

Note: Specifications and design are subject to change
without notice.
Width
Width (narrow wheels)
Length
Height
Height (narrow wheels)
Weight
Operating capacity
Tipping capacity
Wheelbase

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
Important: Use only Toro approved attachments.
Other attachments may create an unsafe operating
environment or damage the machine.
117 cm (46 inches)
91 cm ( 36 inches)
299.7 cm (118 inches)
208 cm (81.9 inches)
204.2 cm (80.4 inches)
1180 kg (2601 lb)
251 kg (553 lb)
717 kg (1580 lb)
122 cm (48 inches)
14

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
Important: Before operating, check the fuel and oil
level, and remove debris from the machine. Also, ensure
that the area is clear of people and debris. You should
also know and have marked the locations of all utility
lines.

Adding Fuel

Use low or ultra low sulfur diesel fuel (ULSD) in the engine
of this machine. The use of other fuels can cause the loss of
engine power and high fuel consumption. The diesel fuel
used in this machine must meet the specifications of D975
of ASTM International. See your diesel fuel distributor. The
D975 standard defines two ULSD standards, Grade No.
2-D S15 (regular ULSD) and Grade No. 1-D S15 (a higher
volatility ULSD fuel with a lower gelling temperature than
regular ULSD).
Fuel tank capacity: 27 L (7.1 gallons)
Use summer grade diesel fuel (No. 2-D) at temperatures
above 20° F (-7° C) and winter grade (No. 1-D or No.
1-D/2-D blend) below that temperature. Use of winter grade
fuel at lower temperatures provides lower flash point and
cold flow characteristics which will ease starting and reduce
fuel filter plugging.
Use of summer grade fuel above 20° F (-7° C) will contribute
toward longer fuel pump life and increased power compared
to winter grade fuel.
Important: Do not use kerosene or gasoline instead of
diesel fuel. Failure to observe this caution will damage
the engine.
WARNING
Fuel is harmful or fatal if swallowed. Long-term
exposure to vapors can cause serious injury and
illness.
• Avoid prolonged breathing of vapors.
• Keep face away from nozzle and fuel tank or
conditioner opening.
• Keep fuel away from eyes and skin.