Maintenance; Recommended Maintenance Schedule(S) - Toro Pro Sneak 360 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 25 hours
After the first 50 hours
After the first 250 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
Every 400 hours
Every 500 hours
Every 1,000 hours
Every 1,500 hours
Every 4,000 hours
Yearly
Yearly or before storage
Every 2 years
Maintenance Procedure
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Change the hydraulic fluid.
• Grease the machine (Grease immediately after every washing).
• Check the air filter service indicator light (more frequently if conditions are dusty
or sandy).
• Check the engine oil level.
• Check the tire pressure.
• Check the tire pressure.
• Check the lug nuts.
• Clean the radiator.
• Check the cooling system.
• Check the hydraulic fluid level.
• Remove debris from the machine and screens.
• Check for loose fasteners.
• Remove the air cleaner cover, clean out any debris, and check the air filter service
indicator light (more frequently if conditions are dusty or sandy).
• Drain water and other contaminants from the fuel filter/water separator.
• Change the engine oil.
• Check the battery electrolyte level (replacement battery only).
• Check the axle oil levels.
• Check the cooling system hoses.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Check for dirt build-up in the chassis.
• Change the oil filter.
• Replace the fuel filter.
• Check the battery cable connections.
• Check the transmission oil.
• Replace the hydraulic filter.
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Check and maintain the ROPS; check it after an accident.
• Replace the safety air filter (more frequently if conditions are dusty or sandy).
• Change the transmission oil.
• Check the alternator drive belt tension.
• Change the hydraulic fluid.
• Replace all moving hydraulic hoses.
• Replace the alternator drive belt.
• Change the engine coolant (See an Authorized Service Dealer).
• Touch up chipped paint.
• Drain and clean the fuel tank (See an Authorized Service Dealer).
19