422
6-4. Using the other interior features
pressed.
When connecting a device
■
Open the lid, and fully and
securely insert the plug of the
device into the power outlet.
When turning the power
■
outlet off
1
Turn the connected devices
off.
2
Press the AC 120 V switch to
turn the power outlet off.
3
Disconnect each plug from
the power outlet.
4
Close the lid of the power
outlet.
■
The power outlet (120 VAC) can
be used when
"READY" indicator is illuminated.
■
Engine operating
The engine starts automatically and
charging starts when the remaining
charge of the hybrid battery (traction
battery) decreases, etc.
■
The power outlet (120 VAC)
●
Use electrical devices that do not
exceed a total maximum power
usage of 1500 W at AC 120 V for
the power outlet (AC 120 V/1500
W). If electrical devices exceeding
the specified capacity are used,
the protection function will activate
and prevent the power outlet from
being used.
●
A large current may flow causing
the current power to exceed 1500
W depending on the electrical
device used. In this situation, the
protective function activates and
the outlet cannot be used. How-
ever, this is not a malfunction.
●
Certain types of electrical devices
may disturb TV or radio by noises.
●
Power outlet voltage cannot be
measured accurately by using a
commercial tester. If you need to
check the voltage, have the vehi-
cle inspected at your Toyota
dealer.
●
Noise may be heard from the cool-
ing fan under the rear seats when
using the power outlet, but this is
not a malfunction.
■
120 VAC Devices which may
not operate properly
The following 120 VAC devices may
not operate properly even if their
power consumption is less than
1500 W:
●
Devices with high initial peak watt-
age
●
Measuring devices that process
precise data
●
Devices that require an extremely
stable power supply
●
Devices that require a constant
power supply from the power out-
let, such as a device with a timer.