Toyota RAV4 PRIME 2021 Manual page 184

184
3-1. Instrument cluster
Using the head-up display
Vehicle settings and the content
displayed on the head-up dis-
play can be changed by using
the meter control switches.
1
Operate
meter control switches and
select on the multi-infor-
mation display.
2
Operate
meter control switches and
select "HUD Main" to set up
the following items.
Enabling/disabling the
■
head-up display
Press to enable/disable the
head-up display.
Changing the head-up dis-
■
play settings
Press and hold
setting screen and change the
following settings:
 Brightness and vertical posi-
tion of the head-up display
Select to adjust the brightness or
vertical position of the head-up dis-
play.
 Display content
Select to change the display
between the following:
• No content
• Hybrid System Indicator
• Tachometer
Select to enable/disable the follow-
ing items:
or of the
or of the
to display the
• Route guidance to destination (if
equipped)
• Driving support system informa-
tion display
• Compass (if equipped)
• Audio system operation status (if
equipped)
 Display angle
Select to adjust the angle of the
head-up display.
■ Enabling/disabling of the head-
up display
If the head-up display is disabled, it
will remain disabled when the power
switch is turned off then back to ON.
■ Display brightness
The brightness of the head-up dis-
play can be adjusted on
of the multi-information display.
Also, it is automatically adjusted
according to the ambient brightness.
WARNING
■ Caution for changing settings
of the head-up display
If the hybrid system is operating
when changing the display set-
tings, ensure that the vehicle is
parked in a place with adequate
ventilation. In a closed area such
as a garage, exhaust gases
including harmful carbon monox-
ide (CO) may collect and enter
the vehicle. This may lead to
death or a serious health hazard.
screen