Toyota RAV4 PRIME 2021 Manual page 177

*
: This item is displayed only when
driving mode is set to sport mode.
Settings display
Vehicle settings and the content
displayed on the screen can be
changed by using the meter
control switches.
Setting procedure
■
1
Operate or
meter control switches and
select .
2
Operate or
meter control switches and
select the desired item.
• If the function is turned on and
off or the volume, etc. is
changed on the setting
screen, the setting is changed
each time
• For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding . When the setting
screen is displayed, select the
setting or desired value (time,
etc.) with .
3
After changing the settings,
press of the meter control
switches.
LTA (Lane Tracing
■
Assist) (P.323)
Select to set up the following
items.
of the
of the
is pressed.
3-1. Instrument cluster
 "Lane Center"
Select to enable/disable the lane
centering function.
 "Steering Assist"
Select to enable/disable steering
wheel assistance.
 "Alert"
Select to change each notification
method of the lane departure alert.
 "Sensitivity"
Select to set the lane departure
alert sensitivity.
 "Sway Warning"
Select to enable/disable the vehicle
sway warning.
 "Sway Sensitivity"
Select to set the vehicle sway warn-
ing sensitivity.
PCS (Pre-Collision Sys-
■
tem) (P.315)
Select to set up the following
items.
 PCS on/off
Select to enable/disable the pre-
collision system.
 "Sensitivity"
Select to change the pre-collision
warning timing.
BSM (Blind Spot Moni-
■
tor) (P.347)
Select to set up the following
items.
 BSM (Blind Spot Monitor)
on/off
Select to enable/disable the BSM
177
3