Toyota RAV4 PRIME 2021 Manual page 104

104
2-2. Charging
Plug-cord
D
CCID (Charging Circuit Interrupting Device)
E
Power indicator (P.104)
F
Charging indicator (P.104)
G
Error warning indicator (P.104)
H
Safety functions
The CCID (Charging Circuit
Interrupting Device) has the fol-
lowing safety features.
Electrical leakage detec-
■
tion function
If an electrical leakage is
detected during charging, the
power source will be automati-
cally interrupted, thus prevent-
ing fires or electrical shocks
caused by electrical leakage.
If the power source is interrupted,
the error warning indicator flashes.
If the power source is interrupted:
P.105
Automatic check function
■
This is an automatic system
check that is run before
charging begins to check for
problems in the operation of the
electrical leakage detection
function.
If a malfunction is found in the elec-
trical leakage detection function as
a result of the check, the error
warning indicator flashes to inform
the user. (P.105)
Temperature detection
■
function
A temperature detection func-
tion is equipped to the plug.
While charging, if heat is gener-
ated due to looseness on the
outlet side etc., this function
suppresses heat by controlling
the charging current.
Conditions for supplying
■
current to the vehicle
The CCID (Charging Circuit
Interrupting Device) is designed
to prevent electrical current from
being supplied to the charging
connector when it is not con-
nected to the vehicle, even if the
plug is inserted into the outlet.
CCID (Charging Circuit
Interrupting Device) indi-
cators
Indicator operation
■
3 indicators are used to indicate
the following conditions.