Main
Sub-Menu
Camera CH. Setup
By selecting Yes/No, you will be able to enable/disable the camera setup.
PTC-150T-01/02/03
The PTC-150T-01/02/03 options will allow you to configure basic settings of the respective cameras.
Camera Info
This field provides camera information display such as Vendor ID, MB Version, FPGA Version, Motor
Version and DVIP Version.
Video
In the "Video" sub-option, you will be able to configure the Video Format, Mirror Mode, Joystick
Direction and Joystick Speed.
The available resolutions in Video Format are listed as follows:
1080i/60/50
1080p/59.94/50/29.97/25
720p/59.94/50
In "Mirror Mode", there are three types of modes available:
V: Vertical mirroring
H: Horizontal mirroring
H+V: Horizontal and Vertical mirroring
In Joystick Pan/Tilt, you can either select the normal PAN/TILT direction or reverse the PAN/TILT
direction. The PAN/TILT speed can be configured in Memory Speed, which ranges from 1-18.
Operator
The Operator sub-option offers the user basic camera operation functions, which are described below:
Power: Select ON to start powering the selected camera; select Standby to enter the camera into
power standby mode.
R-Gain/B-Gain: The red and blue components can be adjusted, ranging from 0 to 255.
Tally LED: You can either turn the tally light off or enable the red or green tally light.
Options
Joystick Pan
Joystick Tilt
Memory Speed
Operator
Power
R-Gain
B-Gain
Tally LED
Values
V
H
H+V
Normal
Reverse
Normal
Reverse
1-18
On/Standby
0-255
0-255
Off
Red
Green
33