3.8.1 Camera CH. Setup
By selecting this sub-option, you will be able to enable/disable the camera setup.
3.8.2 PTC-150T-01/02/03
The PTC-150T-01/02/03 options will allow you to configure basic settings of the respective cameras.
Camera Info
Selecting the "Camera Name" will open up a keyboard on which you will be able to rename the
selected camera. Other parameters right below are simply information display such as Vendor ID, MB
Version, FPGA Version, and Motor Version.
Video
In the "Video" sub-option, you will be able to configure the Video Format, Mirror Mode, Joystick
Direction and Joystick Speed.
The available resolutions in the Video Format parameter are listed as follows:
1080i/60
1080i/50
1080p/29.97
1080p/25
720p/59.94
720p/50
1080p/59.94
1080p/50
In "Mirror Mode", there are three types of modes available:
V: Vertical mirroring
H: Horizontal mirroring
Mirror Mode
Joystick Pan
Joystick Tilt
Memory Speed
Operator
Power
R-Gain
B-Gain
Tally LED
31
720p/50
1080p/59.94
1080p/50
Off
V
H
H+V
Normal
Reverse
Normal
Reverse
1-16
On/Off
0-255
0-255
Off
Red
Green