Datavideo HS-1600T MKII Instruction Manual page 12

6. TALLY Output Port
Sends Red and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next
camera source. Tally output port can connect other
Datavideo peripheral devices such as ITC-100, ITC-
200, AM-100 or other monitor models, allowing the
peripheral device to communicate with the HS-1600T
MKII or send tally signal to be displayed on the
monitor.
See Appendix 1 for physical pin connections and
Section 3.5 for Tally Mode selection.
7. Audio Input – XLR Balanced (CH1/CH2)
Two channels of XLR Balanced Audio Input.
8. Audio Input – Stereo RCA (Left/Right)
Connects unbalanced analog audio source (stereo).
9. Power Switch
Power switch ON/OFF
10. DC IN
DC in socket connects the supplied 48V / 190W PSU.
The connection can be secured by screwing the
outer fastening ring of the DC In plug to the socket.
11. Stream Port
The stream port allows the user to establish direct
connection between the notebook computer and the
HS-1600T MKII in order to access the built-in NVS-31
or connect the NVS-31 to any local area network.
Note: See the Chapter 6 Video Streaming for device
configuration and operations.
12