Datavideo HS-1600T MKII Instruction Manual page 68

Follow the steps below to overlay text on the video:
1.
Open the CG settings page.
2.
Set the CG layer.
3.
Select the CG Type.
4.
If Text is selected, enter the overlay text in the Text field, otherwise browse for the picture file
on the disk.
5.
Enter the X and Y coordinates to set the CG object position.
6.
If you have selected the picture CG, you will need to adjust the object's width and height as
well.
7.
Set the foreground color.
8.
Click Apply button to save CG settings.
Note: Increasing the X coordinate moves the overlay object to the right and decreasing the X
coordinate moves the overlay object to the left; increasing the Y coordinate moves the overlay
object down and decreasing the Y coordinate moves the overlay object up.
68