Stream And Record Buttons; Record Button; Stream Button - Datavideo HS-1600T MKII Instruction Manual

6.4 Stream and Record Buttons

The RECORD, STREAM, VERTICAL and BITRATE buttons on the front panel of the HS-1600T MKII give
the user certain controls of the record and stream functions. In this section, we will cover operations
of these four buttons in detail.
The table below summarizes the RECORD and STREAM Button LED behaviors:

RECORD Button

Solid White Record function in idle state
Blinking Red Record function is activating or resetting
Solid Red Record function activated
Record Button
Press the RECORD button to start/stop recording.
Start recording
 When idle, the RECORD button is solid white.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is activating, the RECORD button turns from solid white, then
blinking red and finally to solid red.
 When the RECORD button is solid red, this indicates that the record function has been
successfully activated.
Stop recording
 While recording, the RECORD button is solid red.
 Press and hold the RECORD button for approximately 2 seconds.
 When the record function is terminating, the RECORD button turns from solid red, then
blinking red and finally to solid white.
 When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.

Stream Button

Press the STREAM button to start/stop streaming.
Start streaming
 When idle, the STREAM button is solid white.
STREAM Button
Stream function in idle state
Stream function is activating or resetting
Stream function activated
69