Datavideo HS-1600T MKII Instruction Manual page 11

HDBaseT IN 1 (CH1)
HDBaseT IN 3 (CH4)
Note: Please use program source row buttons to select the Program video source and preview
source row buttons to select the Preview video source.
2. HDMI Video IN
The HDMI/PC Input port allows connection of an
additional HDMI video source or a PC and the video
or the PC screen will be displayed in the fourth
quadrant of the Multiview (built-in monitor). The
Loop OUT port allows you to connect an additional
monitor for displaying the video source connected or
the PC screen separately.
Multiview Screen
3. HDBaseT OUT
The HDBaseT OUT port allows you to deliver video
directly to HDBaseT devices such as the HBT-11
HDBaseT Receiver Box (Contact your local Datavideo
office or visit our official website for more
information). Note that the maximum video
transmission distance is 60 meters.
4. HDMI Video OUT 2/3
The HDMI Video Out 2/3 output Program video only.
Connect these two ports to HDMI monitors or other
HDMI destination devices.
5. USB F/W Upgrade Port
USB port for firmware upgrade. Please refer to the
Firmware Upgrade
11
HDBaseT IN 2 (CH2)
HDMI/PC (CH5)
section for details.