Example E-Mail Log - ZyXEL Communications EX5501-B0 User Manual

Table 137 Maintenance > Log Setting (continued)
LABEL
E-mail Log Settings
E-mail Log
Settings
Mail Account
System Log Mail
Subject
Security Log
Mail Subject
Send Log to
Send Alarm to
Alarm Interval
Active Log
System Log
Security Log
Cancel
Apply

37.2.1 Example E-mail Log

An 'End of Log' message displays for each mail in which a complete log has been sent. The following is
an example of a log sent by e-mail.
• You may edit the subject title.
• The date format here is Day-Month-Year.
• The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
• 'End of Log' message shows that a complete log has been sent.
Chapter 37 Log Setting
DESCRIPTION
Click this switch to have the Zyxel Device send logs and alarm messages to the configured e-
mail addresses. When the switch goes to the right
not.
Select a mail account from which you want to send logs. You can configure mail accounts in
the Maintenance > E-mail Notification screen.
Type a title that you want to be in the subject line of the system log e-mail message that the
Zyxel Device sends.
Type a title that you want to be in the subject line of the security log e-mail message that the
Zyxel Device sends.
The Zyxel Device sends logs to the e-mail address specified in this field. If this field is left blank, the
Zyxel Device does not send logs via e-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack, system
error, or forbidden web access attempt occurs. Enter the e-mail address where the alert
messages will be sent. Alerts include system errors, attacks and attempted access to blocked
web sites. If this field is left blank, alert messages will not be sent via e-mail.
Specify how often the alarm should be updated.
Select the categories of system logs that you want to record.
Select the categories of security logs that you want to record.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
, the function is enabled. Otherwise, it is
306