Parental Control - ZyXEL Communications EX5501-B0 User Manual

Figure 39 LAN Setup
Each field is described in the following table.
Table 11 Status Screen
LABEL
LAN IP Setup
IP Address
Subnet Mask
IP Addressing Values
Beginning IP
Address
Ending IP
Address
DHCP Server State
DHCP Server
Lease Time
Days/Hours/
Minutes
Save

5.5 Parental Control

Use this screen to view the number of profiles that were created for parental control.
Chapter 5 Connection Status
DESCRIPTION
Enter the LAN IPv4 address you want to assign to your Zyxel Device in dotted decimal
notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0
(factory default). Your Zyxel Device automatically computes the subnet mask based on the
IP address you enter, so do not change this field unless you are instructed to do so.
This field specifies the first of the contiguous addresses in the IP address pool.
This field specifies the last of the contiguous addresses in the IP address pool.
This is the period of time DHCP-assigned addresses is used. DHCP automatically assigns IP
addresses to clients when they log in. DHCP centralizes IP address management on central
computers that run the DHCP server program. DHCP leases addresses, for a period of time,
which means that past addresses are "recycled" and made available for future
reassignment to other systems.
Enter the lease time of the DHCP server.
Click Save to save your changes.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
72