ZyXEL Communications EX5501-B0 User Manual page 215

Figure 132 Access Control: Add/Edit
The following table describes the labels in this screen.
Table 84 Access Control: Add/Edit
LABEL DESCRIPTION
Filter Name Enter a descriptive name of up to 16 alphanumeric characters, not including spaces,
underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you are editing the
ACL rule.
Order Select the order of the ACL rule.
Select Source IP Select the source device to which the ACL rule applies. If you select Specific IP Address, enter
Address the source IP address in the field below.
Source IP Enter the source IP address.
Address
Select Select the destination device to which the ACL rule applies. If you select Specific IP Address,
Destination enter the destiniation IP address in the field below.
Device
Destination IP Enter the destination IP address.
Address
IP Type Select whether your IP type is IPv4 or IPv6.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 17 Firewall
215