Example E-Mail Log - ZyXEL Communications VMG3925-B10A User Manual

Table 120 Maintenance > Logs Setting (continued)
LABEL
Mode
Syslog Server
UDP Port
E-mail Log Settings
E-mail Log
Settings
Mail Account
System Log
Mail Subject
Security Log
Mail Subject
Send Log to
Send Alarm to
Alarm Interval
Active Log
System Log
Security Log
Apply
Cancel

35.2.1 Example E-mail Log

An "End of Log" message displays for each mail in which a complete log has been sent. The
following is an example of a log sent by e-mail.
• You may edit the subject title.
• The date format here is Day-Month-Year.
• The date format here is Month-Day-Year. The time format is Hour-Minute-Second.
• "End of Log" message shows that a complete log has been sent.
Chapter 35 Log Setting
DESCRIPTION
Select the syslog destination from the drop-down list box.
If you select Remote, the log(s) will be sent to a remote syslog server. If you select Local
File, the log(s) will be saved in a local file. If you want to send the log(s) to a remote syslog
server and save it in a local file, select Local File and Remote.
Enter the server name or IP address of the syslog server that will log the selected categories
of logs.
Enter the port number used by the syslog server.
Select Enable to have the VMG send logs and alarm messages to the configured e-mail
addresses.
Select a mail account from which you want to send logs. You can configure mail accounts in
the Maintenance > Email Notification screen.
Type a title that you want to be in the subject line of the system log e-mail message that
the VMG sends.
Type a title that you want to be in the subject line of the security log e-mail message that
the VMG sends.
The VMG sends logs to the e-mail address specified in this field. If this field is left blank, the
VMG does not send logs via E-mail.
Alerts are real-time notifications that are sent as soon as an event, such as a DoS attack,
system error, or forbidden web access attempt occurs. Enter the E-mail address where the
alert messages will be sent. Alerts include system errors, attacks and attempted access to
blocked web sites. If this field is left blank, alert messages will not be sent via E-mail.
Specify how often the alarm should be updated.
Select the categories of system logs that you want to record.
Select the categories of security logs that you want to record.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
VMG3925-B10A User's Guide
246