ZyXEL Communications EX5501-B0 User Manual page 81

Figure 49 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode)
The following table describes the labels in this screen.
Table 17 Network Setting > Broadband > Add/Edit New WAN Interface (Routing Mode)
LABEL DESCRIPTION
General Click this switch to enable or disable the interface. When the switch goes to the right
function is enabled. Otherwise, it is not.
Name Specify a descriptive name for this connection.
Type This field shows Ethernet and indicates an Ethernet connection to a PON (Passive Optical
Network).
Mode Select Routing if your ISP give you one IP address only and you want multiple computers to share
an Internet account.
Encapsulation Select the method of encapsulation used by your ISP from the drop-down list box. This option is
available only when you select Routing in the Mode field.
The choices are PPPoE and IPoE.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 6 Broadband
81
, the