ZyXEL Communications EX5501-B0 User Manual page 88

Figure 53 Network > Broadband > Cellular Backup (Budget Setup)
The following table describes the labels in this screen.
Table 19 Network Setting > Broadband > Cellular Backup
LABEL DESCRIPTION
General
Cellular Backup Click this switch to have the Zyxel Device use the cellular connection as your WAN or a backup
when the wired WAN connection fails. When the switch goes to the right
enabled. Otherwise, it is not.
Ping Check Click this switch to ping check the connection status of your WAN. When the switch goes to the
right
You can configure the frequency of the ping check and number of consecutive failures before
triggering cellular backup.
Check Cycle Enter the frequency of the ping check in this field.
Consecutive Fail Enter how many consecutive failures are required before cellular backup is triggered.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 6 Broadband
, the function is enabled. Otherwise, it is not.
88
, the function is