ZyXEL Communications EX5501-B0 User Manual page 297

The following table describes the fields in this screen.
Table 133 Maintenance > SNMP
LABEL DESCRIPTION
SNMP Agent Enable this switch to let the Zyxel Device act as an SNMP agent, which allows a manager
station to manage and monitor the Zyxel Device through the network, Click on this switch to
enable/disable it. When the switch goes to the right
Get Community Enter the Get Community, which is the password for the incoming Get and GetNext requests
from the management station.
Set Community Enter the Set Community, which is the password for the incoming Set requests from the
management station.
Trap Community Enter the Trap Community, which is the password sent with each trap to the SNMP manager.
The default is public and allows all requests.
System Name Enter the SNMP system name.
System Location Enter the SNMP system location.
System Contact Enter the SNMP system contact.
Trap Destination Type the IP address of the station to send your SNMP traps to.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes back to the Zyxel Device.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
Chapter 34 SNMP
297
, the function is enabled.