Create/Edit A Parental Control Profile - ZyXEL Communications EX5501-B0 User Manual

Each field is described in the following table.
Table 12 Parental Control: Schedule
LABEL
Parental Control
Active
Scheduled Profile
Add more Profile

5.5.1 Create/Edit a Parental Control Profile

Click Add more Profile to create a profile or click Edit of an existing profile to change its settings. Use this
screen to add a device(s) in a profile and block Internet access on the profile device(s).
Figure 43 Parental Control: Select Device
Each field is described in the following table.
Table 13 Parental Control: Select Device
LABEL
Profile Name
Profile Active
Profile Device List
Allowing Schedule
Chapter 5 Connection Status
DESCRIPTION
Click this switch to enable or disable parental control. When the switch goes to the right
( ), the function is enabled. Otherwise, it is not.
Click this switch to enable or disable a created profile. When the switch goes to the right
( ), this profile is active. Otherwise, it is not.
This screen shows all the created profile(s).
Click beside Profile Device List to view more information about the profile. You can
click Delete to remove the profile or click Edit to change the profile settings.
Only the Add more Profile button displays if there is no profile created.
Click this button to create a new profile.
DESCRIPTION
Enter a descriptive name for the profile.
Click this switch to enable or disable the profile. When the switch goes to the right
profile is enabled. Otherwise, it is disabled.
This field shows the devices selected on the right for this profile.
This field shows the time during which Internet access is blocked on the profile device(s).
Select the device(s) on your network for this profile and click Next.
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
74
, the