The Tftp Server Name Screen; Technical Reference; Lans, Wans And The Vmg - ZyXEL Communications VMG3925-B10A User Manual

The following table describes the labels in this screen.
Table 36 Network Setting > Home Networking > Wake on Lan
LABEL
Wake by
Address
IP Address
MAC Address
Wake up

8.8 The TFTP Server Name Screen

Use the TFTP Server Name screen to identify a TFTP server for configuration file download using
DHCP option 66. RFC 2132 defines the option 66 open standard. DHCP option 66 supports the IP
address or the hostname of a single TFTP server.
Click Network Setting > Home Networking > TFTP Server Name to open this screen.
Figure 57 Network Setting > Home Networking > TFTP Server Name
The following table describes the labels in this screen.
Table 37 Network Setting > Home Networking > TFTP Server Name
LABEL
TFTP Server
Name
Apply
Cancel

8.9 Technical Reference

This section provides some technical background information about the topics covered in this
chapter.
8.9.1

LANs, WANs and the VMG

The actual physical connection determines whether the VMG ports are LAN or WAN ports. There are
two separate IP networks, one inside the LAN network and the other outside the WAN network as
shown next.
Chapter 8 Home Networking
DESCRIPTION
Select Manual and enter the IP address or MAC address of the device to turn it on remotely.
The drop-down list also lists the IP addresses that can be found in the VMG's ARP table.
Select an IP address and it will then automatically update the IP address and MAC address
in the following fields.
Enter the IPv4 IP address of the device to turn it on.
Enter the MAC address of the device to turn it on. A MAC address consists of six
hexadecimal character pairs.
Click this to send a wake up packet to wake up the specified device.
DESCRIPTION
the IP address or the hostname of a single TFTP server.
Enter the
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
VMG3925-B10A User's Guide
128