Camping On - Busy Station, Automatic Callback - Comdial CONVERSip EP100 User Manual

2. Press programmed SAVE NUMBER REDIAL button (system
automatically dials the number that you saved earlier).
3.5 Camping On - Busy Station,
Automatic Callback
If you call another station and receive a busy signal or a Do Not
Disturb tone, you can press a button that will cause the system to ring
your telephone when the station is available.
To camp on at any busy station,
1. Select CAMP.
2. Your telephone immediately
hangs up. When the station you
called becomes available, your
telephone rings with five short
tone bursts.
When you hear five short tone bursts,
press INTERCOM or select ANS. The
other telephone starts ringing.
Note: If you do not press INTERCOM after the ring back tones
within the time limit set by the installer, the call back is canceled.
To cancel the call back before your telephone sounds the tone bursts,
press INTERCOM and dial #6.
To camp on at a station with a Do Not Disturb condition set, select
CAMP. A call back occurs when the called station is no longer set in
the Do Not Disturb mode.
Sept '04
Comdial
CONVERSip EP100 User
J Doe Ext 321 Is Busy
SOHVA
CAMP
Camping On Selection
NEXT
43