Comdial CONVERSip EP100 User Manual page 49

CONVERSip EP100 User
If you are involved in a conference call with two outside lines, you
can drop out of this established conference call and leave the outside
lines in the conference with each other. This is known as an unsuper-
vised conference call.
To drop out of a conference call you initiated involving outside lines
(creating an unsupervised conference), dial #. The lines remain
lighted and in use until one or both outside parties disconnect; when
only one party drops out of an unsupervised conference, the other
party remains on hold until he hangs up or the line is answered.
To rejoin an unsupervised conference between two outside lines,
press TAP or DSS/BLF button of one of the conferencing stations.
Managing a
To Add a Caller
to a Conference...
Other
Conference
Station
Call
...Select CONF
or Press TRNS/CONF.
To Drop Out of
A Conference...
To Remove a Caller
From A Conference...
Your
Station
Other
...Dial #.
Station
...Select Line Button
and Disconnect Line.
Managing a Conference
Sept '04
Comdial 51