Redialing; Redial - Last-Dialed Number; Redial Programming (Storing Numbers) - Comdial CONVERSip EP100 User Manual

Making Calls

3.4 Redialing

For instruction on using your system's Automatic Redial feature, see
Section 7.4, Automatic Redial.

3.4.1 REDIAL - LAST-DIALED NUMBER

To redial the last-dialed number,
1. Press SPEAKER or hang up handset to disconnect current
ringing or busy tone.
2. Dial #.
3. Listen for ringing or busy tone over the telephone speaker:

3.4.2 REDIAL PROGRAMMING (STORING NUMBERS)

To permanently store a number you've
just dialed, choose one of these
methods:
1. Select SAVE and press unused
programmable button OR,
2. Press programmed SAVED
NUMBER REDIAL button (see
Section 6.4, LCD Feature But-
tons for set up details).
To store a number while you are on a call (if available),
1. Press programmed SAVE NUMBER REDIAL button twice
(the display prompts you to dial a number).
2. Dial the number that you wish to save (the system immediately
saves the number for later redial; it does not dial it over the line
you are on now).
To redial the saved number,
1. Press line button to select a line.
42 Comdial
L123
CONF
SAVE
Saving a Dialed Number
ARDL
Sept '04