Auxiliary Jack - Comdial CONVERSip EP100 User Manual

2. Press TAP to retrieve the displayed parked call.
If you receive a parked call message on your Tracker pager,
1. Go to any system station.
2. Press INTERCOM.
3. Dial Tracker pager orbit code (#800 to #899).
4. Retrieve call.
To enable or disable a Tracker pager at your station,
1. Press INTERCOM.
2. Dial #07 to enable, or dial #06 to disable.
3. Press SPEAKER to end.

7.6 Auxiliary Jack

Your EP100 may be equipped with an auxiliary jack that provides an
interface for a headset, a tape recorder, an external ringer, or an exter-
nal pager. If your EP100 is so equipped, you must set up one of its
programmable buttons to serve as an enable/disable button for each
auxiliary device you plan to connect. The system activates only the
device that it identifies in the display, and activates only one device at
any time.
Connectors on Bottom of Telephone
Line Cord
The following modes are programmable with the auxiliary jack:
• The headset mode allows you to operate your telephone with
a headset instead of as a speakerphone or with the handset.
Sept '04
Auxiliary
Handset
Jack
Auxiliary Jack Location
Comdial
CONVERSip EP100 User
Auxiliary Jack
Handset
87