Comdial CONVERSip EP100 User Manual page 82

Other Advanced Features
Note: The AUTOMATIC REDIAL button described in the following
steps must have already been programmed by your system installer or
attendant. You cannot program this feature yourself.
To use the automatic redial feature to redial a busy or unanswered
number,
1. While on the call, select ARDL or
press the AUTOMATIC
REDIAL button programmed by
your installer.
2. The system repeatedly dials the
number until you cancel the fea-
ture, or until the system has
dialed the number a prepro-
grammed number of times (determined by your system
installer).
3. The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
4. If your installer has enabled answer supervision on your line,
the system automatically cancels automatic redialing and turns
the AUTOMATIC REDIAL light off.
5. If answer supervision is not enabled, select ARDL or the pro-
grammed AUTOMATIC REDIAL button while on the call to
cancel automatic redialing.
6. If your system installer has enabled the redial multiple num-
bers feature, you can have up to 10 numbers in your redial
queue. To add numbers to your redial queue, repeat step 1.
To scroll through numbers in your redial queue if your telephone is
currently idle,
1. Select ARDL or the programmed AUTOMATIC REDIAL but-
ton. The display shows the last number dialed.
2. Choose one of the following:
• Select REMOVE to remove the number from the redial
queue.
84 Comdial
L123
CONF
Initiating Auto Redial
ARDL
Sept '04