Muting Your Ep100 - Comdial CONVERSip EP100 User Manual

Other Advanced Features
There are at least eight handset loudness levels that you can set for
the current call. While on a call and in handset mode, press the
VOLUME Up or VOLUME Down button once for each change in
loudness that you desire.
Note: When the call ends, the system resets the loudness of all future
calls to the programmed (default) setting. For instructions in setting
your EP100's default volume, see the next section of this chapter.
There are eight headset loudness levels that you can set for the
current call. While on a call and in headset mode, press the
VOLUME Up or VOLUME Down button once for each change in
loudness that you desire.
There are eight group listening loudness levels. While on a call and
in the group listening mode, press VOLUME Up or VOLUME Down
button once for each change in loudness you desire.
There are eight background music loudness levels. While back-
ground music is on at your station, press VOLUME Up or VOLUME
Down button once for each change in loudness you desire. This level
remains set for background music until you change it again, even if
you turn off the feature and then reactivate it.

7.9.2 MUTING YOUR EP100

By using the MUTE button, you can block transmission of your voice
to the distant party. You can do this whether you are using the
handset or the speaker.
To mute your station, press MUTE (mute function and light turn on).
You can still hear the distant party, but they cannot hear you.
To speak to the distant party, press MUTE again (mute function and
light turn off).
Sept '04
92 Comdial