Cruise Control Indicator Light; Cruise Control Set Indicator Light - Subaru Impreza 2016 Manual

7-52
Starting and operating/Cruise control
! To decrease the speed (by the
"RES/SET" switch)
Except XV models
XV models
Press the RES/SET switch to the SET
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
U.K. models:
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be decreased by 1 mph
(1.6 km/h) each time by pressing the
RES/SET switch to the
quickly.
NOTE
If the "RES/SET" switch is continu-
ously operated quickly to the "SET"
side, the set vehicle speed displayed in
the combination meter becomes the
low speed setting. However, when the
set vehicle speed is set to a speed
much lower than the actual vehicle
speed, the set speed may be reset to
the actual vehicle speed.
Except U.K. models:
When the difference between the actual
vehicle speed and the set speed is small,
the set speed can be decreased by 1 km/h
(0.6 mph) each time by pressing the RES/
SET switch to the SET side quickly.
NOTE
If the "RES/SET" switch is continu-
ously operated quickly to the "SET"
side, the set vehicle speed displayed in
the combination meter becomes the
low speed setting. However, when the
set vehicle speed is set to a speed
much lower than the actual vehicle
speed, the set speed may be reset to
the actual vehicle speed.
SET side
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the
switch to the SET side once. Now the
desired speed is set and the vehicle will
keep running at that speed without de-
pressing the accelerator pedal.
& Cruise control indicator light
Refer to Cruise control indicator light
F3-36.
& Cruise control set indicator
light
Refer to Cruise control set indicator light
F3-36.
RES/SET