& To remove the cover housing
1. Rewind the cover.
2. Push the cover housing to the right
side and shorten it.
3. Take it off the retainer.
Interior equipment/Cargo area cover (5–door – if equipped)
& Stowage of the cargo area
cover
For models with a flat tire repair kit, the
cargo area cover can be stowed under the
cargo floor as follows.
1. Raise and fold the rear end of the
cargo floor board.
2. Stow the cover housing in the cargo
area end.
3. Put the cargo floor board back while
hanging two retaining straps on the hooks
that are located on the rear wall of cargo
area.
– CONTINUED –
6-15