Subaru Impreza 2016 Manual page 543

2. Remove the three screws and then
remove the cover.
3. Create a gap between the battery and
the case by pushing the battery gently
with your finger as shown in the illustra-
tion. Then, insert a flat-head screwdriver
that has been wrapped in insulating tape
into the gap.
4. Move the flat-head screwdriver in the
order shown in 1. and 2., and remove the
battery, taking care not to damage the
base panel or terminal.
Maintenance and service/Replacing key battery
5. Remove the old battery.
6. Fit a new battery (type CR-1620 or
equivalent) in the case with its positive (+)
side facing upward.
7. Put the case together by fitting the
mating part of the button side into the hook
11-63
– CONTINUED –