Select Lever/Gear Position Indicator (If Equipped) - Subaru Impreza 2016 Manual

1
* : They cannot be displayed when the
ignition switch is in the ON position.
2
* : MT models only
3. To change the current setting, press
the trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
. The initial setting for the shift-up
indicator has been set for activation
" " at the time of shipment from the
factory.
. It is not possible to change the
setting of the shift-up indicator when
the ignition switch is in the "ON"
position. Change the setting when the
ignition switch is in the "LOCK"/"OFF"
or "ACC" position.
Instruments and controls/Warning and indicator lights
& Select lever/gear position in-
dicator (if equipped)
Type A
1) Upshift indicator
2) Downshift indicator
3) Select lever/gear position indicator
Type B
1) Upshift indicator
2) Downshift indicator
3) Select lever/gear position indicator
This indicator shows the position of the
shift lever (MT models)/select lever (CVT
models).
For CVT models with manual mode, when
the manual mode is selected, the gear
position indicator (which shows the cur-
rent gear selection) and the upshift/down-
shift indicator light up. Refer to Selection
of manual mode F7-26.
! Gear shift indicator (if equipped)
When shifting up is recommended for
good fuel economy, the upshift indicator
blinks.
When shifting down is recommended, the
– CONTINUED –
3-35